Main Menu
|
PC Mods Power Down ProtectorProvided by: PC Mods
The fact remains; when you shut down your computer your CPU will remain warm for some time without anything to cool it. Heat will cause damage to your CPU (the damage is proportional to the temperature), and the more time your CPU is in contact with heat the greater possibility there is that damage will occur. These two facts are pretty much so non-debatable, so given these premises the power down protector should provide some measure of protection against thermal damage.
- All temperatures inserted into this graph are merely estimations based on a general thermal trend. They should not be taken as actual results. Actual results will be discussed at the end of this review. Now, the only real way to test this device is to find many identical computer systems and set them up in rooms with a controlled ambient air temperature. Then 50% of the computers are given power down protectors set to 10 minutes, and the rest are denied the device. The computers are booted, and shutdown rhythmically until a pattern of CPU breakdown occurs. The variable would be the PC Mods device; therefore, any statistically significant number of broken down computers could properly be attributed the presence or absence of this variable (the power-down protector). The experiment would need to be repeatable, and anyone doing the experiment should come up with the same results. I started to set up all 300 of the P4 systems in my basement
laboratory when I received a call right as I was about to power
up the experiment. It turns out it was P.E.T.C. on the line (the
inanimate branch of the well known “P.E.T.A.” organization);
they apparently had gotten wind of my latest project. P.E.T.C.
explained to me that they were the “People for the Ethical
Treatment of Computers” and that if I unnecessarily destroyed
a good number of perfectly good systems they would lobby and press
charges. OK, so I guess “I’m the bad guy”…I
had to call the experiment off and give up a good portion of my
funding in favor of a smaller scale experiment. My results are
as follows. Packaging
Specifications:
Note: This product is made to work with the Wake On LAN jack on your motherboard as a default. If you do not have a Wake on LAN jack, or if you do not wish to use your Wake on LAN jack, please select the alternate adapter cable. The power down protector showed up in a tiny white unmarked box. From the unassuming exterior you would never expect such a clever device to be lurking inside. Along with the device in an antistatic bag, there were a number of wires, a manual, and some sticky Velcro pads neatly packed within. |
||||||||||




