Main Menu
|
Superpower XP03P Gaming Computer CaseProvided by: Superpower
Packaging:
Superpower's XP03P comes in a standard, plain brown box. When I say plain, I mean it. There is nothing on the case's box. Inside the case is secured Styrofoam. Plastic also wraps around the computer case to protect against scratches.
After removing the Styrofoam from the case, I noticed there were screws in it. These screws fell out of the bag inside the case and were all over the place. Features: These features can be seen on Superpower's web site.
Specifications:
Outside: I must admit the Superpower XP03P case looks very sharp. Although, the purple plastic was very hard to get a picture of for it turned out blue in the pictures. Therefore, I had to use Photo Shop to the shade of purple I see. The first thing you notice is the U-Shaped horses. Moving the case is easily accomplished by grabbing unto these horses and lifting. I will note that the horses are plastic and not metal. They bend a little when picking up the case; therefore, if you have a lot of components that are heavy, it might stress the handles and break them.
On the front of the case, about half way up, are the USB and audio ports. To the left of them are 3.5 inch external drive slots. Underneath the slots is an alien design. The top and bottom of the alien's head are the power and reset buttons. In the middle are the alien eyes which are the power and HDD LEDs.
The side panels are symmetric and interchangeable. There is no flashy window but there is some texture as a purplish plastic X extrudes from the flat, black metal.
The back of the case has the basic steel back. Covering it is a cutout black plastic grid with holes for the power supply and motherboard components. You can see the huge 120mm exhaust fan through the plastic. With a 120mm exhaust fan, this case is wider than most, almost 8 inches. |





